Crushing Equipment

    Working Principle : 2PLF series teeth-roller crusher is driven by electromotor via reducer, two tooth-roller rotate inward synchronously in opposite direction. After material dropping from the inlet to crushing chamber,firstly is classified by the tooth-roller with tooth, those which is accepted would pass through the two rollers to the discharging trough,and the massive materials would be crushed,cut, and then discharg...
Check for detail

    Jaw Crusher is mainly used to crush kinds of mining stones primarily, and the largest compression resistance of the material is 320MPa. The jaw crusher is widely used in stone mining, metallurgy industry, building material, highway, railway, and chemical industry.   Working Principle of Jaw Crusher: The motor transmits power through belt, drives the moving jaw to do periodic motion towards the fixed jaw by the ec...
Check for detail

    Description: Double roll Crusher is mainly used for the crushing of medium or lower-hardness mines and rocks with medium or lower rigidity in mine selection, chemicals, cement and building materials industrial production.Roll crushers have a theoretical maximum reduction ratio of 4:1. If a 2 inch particle is fed to the roll crusher the absolute smallest size one could expect from the crusher is 1/2 inch. Roll crushers w...
Check for detail

    First, Use and characteristic: This serial products synthesized the hammer type to be stave and the counter-attack type stave merit, after optimization design\'s new generation product, had the following merit: 1. Feed head is big, the stave cavity is high, can adapt the brick to be big, degree of hardness high material. 2. Hammer head style is novel, the impulse is big, the life is long, hammers the sleeve installm...
Check for detail

    Working Principle: Stone less than 50mm enters Sand Making Machine though conveyor belt. Stone is crushed by hitting other stones. Material falls down to impellor cavity. Under great centrifugal force, it hits material that coming downwards. After hitting each other, they force a vortex between impellor and shell, and hit each other several times, finally smaller stone comes out, and goes to vibrating screen. Satisfac...
Check for detail