Stone Jaw Crusher

    Working Principle : 2PLF series teeth-roller crusher is driven by electromotor via reducer, two tooth-roller rotate inward synchronously in opposite direction. After material dropping from the inlet to crushing chamber,firstly is classified by the tooth-roller with tooth, those which is accepted would pass through the two rollers to the discharging trough,and the massive materials would be crushed,cut, and then discharg...
Check for detail

    Application: Impact crusher is mainly used to crush many kinds of large, medium, small materials such as rock or stone whose side length is less than 500mm, and compression resistance should not be more than 350Mpa. The impact crusher is widely used in hydroelectricity, highway, artificial rock, stone and sand, building material, etc.   Working Principle of Impact Crusher: When the impact crusher works, the mo...
Check for detail

    Jaw Crusher is mainly used to crush kinds of mining stones primarily, and the largest compression resistance of the material is 320MPa. The jaw crusher is widely used in stone mining, metallurgy industry, building material, highway, railway, and chemical industry.   Working Principle of Jaw Crusher: The motor transmits power through belt, drives the moving jaw to do periodic motion towards the fixed jaw by the ec...
Check for detail

    Introduction: Zhongyang Vertical Shaft Hammer Crusher, absorbing domestic advanced technology, show features of stability for working, easy maintenance, high crushing efficiency, cube granular form, and low content for point shape. It is especially suited for rock material shaping and manufacturing high proportion machine-made sand, and widely used in fine crushing of rock, cobblestone and other materials.   &n...
Check for detail

    Description: Double roll Crusher is mainly used for the crushing of medium or lower-hardness mines and rocks with medium or lower rigidity in mine selection, chemicals, cement and building materials industrial production.Roll crushers have a theoretical maximum reduction ratio of 4:1. If a 2 inch particle is fed to the roll crusher the absolute smallest size one could expect from the crusher is 1/2 inch. Roll crushers w...
Check for detail